Wet Room Shower Tray Former Kit Tile On Wetroom Walk in Base with Drain Linear

  

Floors in bathrooms and shower areas will get wet. On unprotected timber floors this can create problems if the grout fails or cracks, as this can lead to tiles lifting if water seeps through to the timber floor causing it to swell and warp. The eZheat wetroom solution eliminates this problem by allowing you to create a fully waterproofed floor.

The trays are totally compatible with electrical underfloor heating. The eZheat Shower Trays contain the following items. 2% Gradient Fall to Drain.

Easy & Quick to Install. These lightweight shower trays are ideal if you're looking to create a stylish yet effective wetroom. The eZheat shower tray allows you to create a waterproof wet room or walk in shower without having to use the traditional "step-in" acrylic tray.

The shower tray gives the installer complete flexability of building there own wet room with a fully tilable shower tray to suit the rest of your bathroom or en-suite. The shower trays removes many of the problems with Damp Penetration especially with timber floors and also descreases heat loss figures due to it's thermal insulation, this is also the case on solid screed floors but instead stops the heat from dispursing into the screed. The eZheat Tanking Kit which comes with the Shower Tray (If Selected) which creates a waterproof seal to create the wet room. 1 Waterproof Membrane to Cover 8m2 (2 Coats). The eZheat shower tray is the ideal product to be used with our 6mm or 10mm Tile Backerboards.

(Please check our store for prices). Due to additional charges imposed by our couriers for deliveries to the Scottish Highlands, offshore islands and Northern Ireland, a surcharge may be levied to cover carriage to these areas (listed below). AB31 to AB38, AB41 to AB45, AB 51 to AB56, BT, FK19 to FK 21, HS1 to HS9, IV1 to IV28, IV30 to IV32, IV36, IV40 to IV49, IV51 to IV56, KA27 to KA28, KW1 to KW3, KW5 to KW17, PA20 to PA49, PA60 to PA78, PH1, PH5 to PH10, PH15 to PH26, PH30 to PH44, TR, GY & E1 to ZE3. Sourcing our products from many of the leading companies in the UK, Europe and the rest of the world, all are products supplied with UK customer service and valid UK warranties.

Due to the high standards we set for products and customer service, much of our business is from repeat customers. Should the customer choose to exercise these rights they must return any goods supplied to them.

No goods will be accepted unless an authorisation number has been issued by Ezheat. We guarantee against any defective products.

The eZheat Shower Trays contain the following items ---Shower Tray ---2% Gradient Fall to Drain ---Easy & Quick to Install ---Lightweight & Sturdy ---Vertical Drain ---Tanking Kit (If Selected) These lightweight shower trays are ideal if you're looking to create a stylish yet effective wetroom. The Tanking Kit Contains ---1 Waterproof Membrane to Cover 8m2 (2 Coats) ---1L Acrylic Primer ---10m Waterproof Membrane Tape ---1 Internal Corner ---300ML Silicone Sealant ---Gloves & Brush The eZheat shower tray is the ideal product to be used with our 6mm or 10mm Tile Backerboards. This item is in the category "Home, Furniture & DIY\Bath\Showers, Baths & Parts\Shower Trays & Bases".

The seller is "ezheat" and is located in this country: GB. This item can be shipped to United Kingdom.

1. Tanking Kit: Yes
2. Grate Type: Linear Shower Grate - Tile
3. Tray Size: 1200 x 900 x 30mm
4. Material: XPS
5. Unit Quantity: 1
6. Type: Tileable Shower Tray Former
7. Features: Suitable for Wet Room, XPS Core, 2% Gradient Fall to Drain, Tanking Kit (If Selected)
8. MPN: SFLINEAR
9. Unit Type: Unit
10. Room: Bathroom
11. Sub-Type: Shower Tray
12. Finish: Grey
13. Brand: EzHeat
14. Suitable For: Wetroom, Wet Room, Shower