ClassicBond One Piece EPDM Rubber Roofing Kit for Flat Roofs. For most applications, the membrane is cut to the size of your roof and supplied as a single piece. BBA Certified and preferred by roofing professionals, ClassicBond is tangibly more pliable, slate grey in colour and is the ideal EPDM rubber roof covering for both large and small flat roofs. With maintenance free properties the EPDM membrane is strong yet lightweight and is not affected by extreme temperatures. As a result the membrane will not crack, peel or split.
This means no on-site joining is required as long as the roof does not exceed these measurements and makes the ClassicBond EPDM the best for quick and easy installation. > 1.2mm EPDM Membrane: equal to your selected size.
> Water based adhesive: to stick the membrane to the main deck area. > Contact adhesive: to stick the membrane around the 150mm perimeter (please see images). The Membrane size is the same as mentioned in kit size. Therefore, your roof size will need to be smaller to allow for edge overlaps.
6metre x 3metre roof kit will fit a roof that is no larger than 5.7metres x 2.7metres. Please Also note EPDM Is designed to be laid over Osb3/Timber Boards and not overlaid on to existing roof surfaces over such as Felt/GRP. This item is in the category "Home, Furniture & DIY\DIY Materials\Roofing, Tiles & Shingles\Roof Sheets & Panels". The seller is "rubber4roofs" and is located in this country: GB. This item can be shipped to United Kingdom.