One Colour Mega Screen Printing Kit 1 Colour Press Kit Work From Home Package

  

One Colour Screen Printing Kit - Work From Home! New 1 Colour Intro Screen Printing Kit. Are you just starting out or upgrading from a Stencil Cut Kit? Coating your screen with emulsion and using an exposure unit, saves time on cutting your stencils out with a knife and also enable you to print more detailed designs. All of the equipment in this kit is compatible for printing onto fabric, t-shirts, sweatshirts, Hoodies, paper/board, card, wood, other flat products and you can also produce your own plastisol transfers if you wish!

Select the ink type for your needs from the following options. If you do not leave a note when checking out, we will automatically send you Waterbased inks. Waterbased - For printing onto t-shirts and other fabrics, paper board and wood. Eco-Friendly, fully wash fast when heat cured. Plastisol - Fabrics, t-shirts, hoodies, sweatshirts, create transfers, Does not air dry, fully wash fast when heat cured.

Print your design from your PC onto transparency. Coat your emulsion and wait for it to dry. (a small domestic fan heater helps). Expose your image using the Exposure unit in this kit.

(You will need a sheet of glass bigger than your image). The ink provided in the waterbased kit is an air drying ink. Simply leave to dry or use a hairdryer and then iron over your print to make it wash proof.

1 Colour printing press with A3 platen board. 1 x UV Lamp Exposure Bulb (lamp not included, you will need a flexible desk lamp with E27 screw type fitting). 2x Screens 20x24 Aluminium Screen with 43T mesh. 1 x 15 Aluminium Coating Trough (to coat the screen with the emulsion).

1 x 15 inch Wooden Squeegee with new blade (to print your image). 10 x A4 Film to make your positives (to create your transparencies from your PC).

1 Roll of masking Tape (for taping/masking the edges of your screen). 6 Mixing Sticks (for mixing your ink). 1 Litre Emulsion (to coat your screen and create your stencil). Cleaning Kit - 1 Litres: Degreaser, Stencil Strip, Screenwash. 4 x 500ml Waterbased inks.

Description / Features / Specifications. Complete with Printing Board 19.7" 15.8" (5040cm).

Holds Screen Frame up to 3 inches deep. Two Adjustable hand wheels for screen stability. Two Springs and tension adjusters for ease of screen elevation. Accurate positioning and good quality prints. Print onto t-shirts / pillow cases / fabric/ paper / other flat products.

Stainless Steel made, convenient in cleaning and no rust.