New Epoxy Resin Kit 4L 128oz 11 Crystal Clear Craft Casting Art Coating Wood

  
1x free 5g random color of mica powder. Please check our shop for different sizes or Resin accessories. Introducing our brand new Epoxy Resin formula from RESIN GLORY! This 4L/128oz kit is perfect for all your crafting needs, whether you're coating or casting.

With a curing time of 24h, 74h hours for full cure, you'll have plenty of time to create your masterpiece. Our Epoxy Resin have great UV resistance and is non-yellowing, making it perfect for use in art projects and woodwork. It is also heat resistant up to 185F. Plus, our resin is safe and non-toxic. Don't miss out on this must-have item for your crafting needs!

EASY TO USE - 1:1 mixing ratio and low viscosity makes our epoxy resin very easy to mix and use, it does not trap the bubbles, as well self-levelling. Try to use the product in a temperature-controlled environment within the optimal product specifications. Recommended workplace temperature 22-27C/70-78F and humidity 50-60%. If resin were kept below 21C or crystallised because of cooler weather, please submerge A and B bottles into a bowl full of warm, NOT hot, water. Resin will become thinner and bubbles degass easier.

Perform a test project to avoid unnecessary mistakes. Measure equal volume (1:1) from each bottle. Stir slowly and thoroughly for 3-5 min, scraping all the surfaces of the container to ensure complete mixing.

You will have 30-40min working time. For layering or top coating, please ensure that the surface is dry and dirt, dust and oils free to achieve optimal bonding. It is furthermore highly recommended to sand the surface (with sandpaper or mechanical preparation). Sanding is not necessary if the previous layer is not fully cured. Pour 1/4in layers for bubble free results.

For large projects max pouring depth 1cm, for smaller projects can be poured up to 3cm. After pouring, cover your project and assure that there will be no sudden temperature changes. Leave to cure for 24h curing time. Please read enclosed instructions for more details and tips. We all want great results, so in cooler weather we need to follow some recommendations. Just submer both parts in warm, NOT HOT, water for about 10 min. Keep your working place at constant temperature, recommended 22-27C.