Injection DPC Damp Proofing Cream Kits Triton Tri Cream

  
A BBA approved silicone emulsion cream for injection into masonry for the control of rising damp. Triton Tri Cream can be used in all types of masonry without the use of high pressure equipment.

The cream is delivered by hand pressure from a simple applicator gun, into a series of holes drilled into the mortar course. From here it migrates rapidly into the masonry pores where the injection cream reverts to a liquid phase and polysiloxanes are formed in situ. During the curing period a low molecular-weight silane vapour is also produced giving excellent migration through the wall. Curing of the DPC starts immediately with the final cure taking 2-6 weeks depending on wall thickness. Extensive field experience with this technology demonstrates that Triton Tri-Cream will perform as well as any conventional liquid injection system against rising damp.

1 Litre Cartridges of Triton (Select Quantity). 1 x 12mm x 210mm SDS drill bit. Optional Plastic DPC Plugs Also Available.

Typical coverage rate is 1L of Triton per 10 linear metres of wall (assuming a typical 115mm brick wall). Store in cool, frost-free conditions (temporary exposure to slight frost in transit should not affect usage and stability).