Helical Remedial Ties Titan Ties (100 Nr)

  

Helical Remedial Wall Ties - 100 Ties. Upgrade Option Also Available for Installation Kit.

Please note that you will also require a suitably sized SDS masonry drill bit and a standard fixing tool to install for a typical dry / mechanical fix - these can be provided with our installation kit upgrade option. Discounts available on request for bulk orders. What Length of Helical Tie? Please watch our installation video. And view our installation guide. For a fast and low-cost way to finish the pilot holes after installation, use Titan Ties Injectable Repair Mortar. If an exact colour match to existing masonry is required, consider using SureStain Colour Matching Mortar. SDS+ Drill Bits (for forming the pilot hole) are supplied seperately or with kit options. Helical ties must have a minimum embedment in the inner (load bearing) leaf of 70mm. Pilot holes will be between 5.5mm and 6.5mm. We recommend that you test the strength of substrate before choosing the appropriate drill hole. Above table assumes that facing brickwork is 110mm wide imperial brickwork (make adjustment for small widths / 100mm metric bricks). Helical mechanical wall ties should be fixed into the centre of bricks- not mortar joints. The masonry should be sound. House covered in render / pebble dash? If mortar joints are not visible or there are concerns about masonry condition.

In highly corrosive areas such as marine locations or heavily polluted industrial environments. Wall ties being replaced should be removed or isolated.