Electric Underfloor Heating Loose Cable Kit Fastwarm 150w Per M² ALL SIZES

Fastwarm 150w heating cable kits are industry leading heating systems that can be used as a primary heat source (when used in conjunction with Fastwarm XPS or Tile backer boards, the warm up time will and running costs can be reduced as much as 25%) providing an effective solution to radiant heating under almost any floor covering and in any room type. Fastwarm heating cables comprise of the thinnest (2mm) fluoropolymer (Teflon) coated, dual-core resistive heating cable on the market. The cables are evenly spaced at 65mm intervals to provide an even heat distribution across the floor to suit the required heat output. The cable system allows for use in small confined areas (bathrooms and en suites) plus complicated shaped areas, making fitting a Fastwarm underfloor heating cable suitable for any DIY enthusiast. Please note that all electrical connections should be undertaken by a qualified electrician. Fastwarm 150w heating cable kits come with everything required to lay and install the Fastwarm underfloor heating system, meaning there is no need for any additional components. Everything you need in a box. Fastwarm 150w heating cable kits come with a peace of mind lifetime guarantee (50 years) as we only use the highest quality components sourced across the globe. Fastwarm heating cables do not utilise PVC as an outer coating which are an inferior casing, meaning you can rest assured that once installed, your Fastwarm underfloor heating system will last a lifetime. Fastwarm loose 150w cable kits Include the following. (0.75m2 - 12m2 = 1 Coil).

(14m2 - 24m2 = 2 Coils). 1 x Fastwarm Programmable Thermostat. (Choice of Digital, Touchscreen and WiFi controllers in white or black) All supplied with a 3m floor sensor probe.

(A water based acrylic primer, which is used to prime the substrate/insulation board to aid bonding and reduce moisture). 1 x Roller and Foam head to apply the Fastprime Primer. Heat resistant duct tape to aid installation and fix any loose laid heating cable. 1 x 2m Conduit length to house the floor sensor probe. Please note that electric underfloor heating elements cannot be shortened/cut so when calculating the correct size for an area please select a cable system that only covers up to 90% of the total floor space. This item is in the category "Home, Furniture & DIY\Heating, Cooling & Air\Heaters & Radiators\Underfloor Heating Systems". The seller is "fastwarm" and is located in this country: GB.

This item can be shipped to United Kingdom, Antigua and Barbuda, Austria, Belgium, Bulgaria, Croatia, Republic of, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Bahrain, Canada, Brazil, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, Korea, South, Switzerland, Taiwan, Thailand, Bangladesh, Belize, Bermuda, Bolivia, Barbados, Brunei Darussalam, Cayman Islands, Dominica, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, Grenada, French Guiana, Iceland, Jersey, Jordan, Cambodia, Saint Kitts-Nevis, Saint Lucia, Liechtenstein, Sri Lanka, Macau, Monaco, Maldives, Montserrat, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Turks and Caicos Islands, Aruba, Saudi Arabia, South Africa, United Arab Emirates, Chile, Bahamas, Colombia, Costa Rica, Dominican Republic, Guatemala, Honduras, Jamaica, Kuwait, Panama, Philippines, Qatar, El Salvador, Trinidad and Tobago, Uruguay, Vietnam.

Thermostat & Accessories: Cable Only (No Stat or Accessories
m2 Coverage: 2.3m2
Item Depth: 2mm
Power Source: Corded Electric
Type: Underfloor Loose Cable System
Unit Type: m²
Area Covered: 1-24 sq m
Brand: FASTWARM
Control Style: App Control, Digital, Push Button, Touch
Items Included: conduit, floor sensor, duct tape, primer, roller, Thermostat
Heating System: Radiant
Voltage: 230v