With maintenance free properties the EPDM membrane is strong yet lightweight and is not affected by extreme temperatures. As a result the membrane will not crack, peel or split. This means no on-site joining is required as long as the roof does not exceed these measurements and makes the ClassicBond EPDM the best for quick and easy installation. > 1.2mm EPDM Membrane: equal to your selected size. > Water based adhesive: to stick the membrane to the main deck area.
> Contact adhesive: for bonding deck perimeter. > EPDM Primer for corner patches were roof meets tiled roof.
> Sure Edge Kerb Edge for 2 sides. > Sure Edge Gutter Drip Edge along the width. > 2 x Sure Edge External Kerb Edge corners. > 2 x External Corner Patches.> 1 x Tool Kit (Scissors/Roller set/Mini roller). > All clips and pins are included for the trims. The Membrane size is the same as mentioned in kit size. Therefore, your roof size will need to be smaller to allow for edge overlaps.
6metre x 3metre roof kit will fit a roof that is no larger than 5.7metres x 2.7metres. Please Also note EPDM Is designed to be laid over Osb3/Timber Boards and not overlaid on to existing roof surfaces over such as Felt/GRP.