Bowed Wall Repair Kits Lateral Restraint Tie Systems

  

Lateral Restraint Ties for Restraining Bulges in Walls - Kits. These lateral restraint ties are suitable for connecting bulging / bowing masonry walls into the sides of two or more timber side joists (where joists span parallel to the wall not onto it).

1Nr 14mm x 450mm SDS masonry drill bit for forming the installation hole through masonry 1Nr SDS setting tool for fixing the ties through the joists 1Nr 380ml polyester resin with mixer nozzle. For restraining bulging / bowing walls.

Tying the wall to two or more timber side joists. Ties are fitted from outside the property with a minimum of disturbance in most cases just lift a few floorboards to determine the position of the joists and to ensure hidden wires or pipes are avoided during the installation.

Each restraint tie has a drill-like leading end for cutting into softwood. Using a SDS drill, simply fix the lateral restraint ties (using the installation tool) into the timbers and resin fix the masonry end.

Smart finished appearance (No wall plates). Suitable for both cavity and solid walls.