A Superb Quality Pergola and all fixings(SIZE SHOWN 3.6m x 3.6m). Quality Smooth Faced Redwood 100 x 100(95 x 95 actual) treated posts. 2 Notched railings with chamfered ends.
4 Notched runners with chamfered ends. Width approx 1800mm to outside of posts, approx 2400mm to end rails. Depth approx 1800mm to outside of posts, approx 2400mm to end of runners. Height is approx 2400mm from base plate to top of pergola.
All fixing screws, base plates and bolts included. Drill bits included for either wood or concrete and a pilot drill for fixing timbers. PZ2 bit and holder for fixing screws. All you need is a drill. We will not be beaten on price like for like.
Deliveries are free to many areas but please check the map in DELIVERIES. 15 year Guarantee against rot. For any inquiries please call 07825 810740. IMPORTANT INFO ON QUALITY OF TIMBER.
WE DO OUR BEST AT ALL TIMES TO SUPPLY THE BEST QUALITY TIMBER WE CAN LAY OUR HANDS ON. TIMBER WILL COME TO YOU IN THE BEST CONDITION POSSIBLE(NOT INCLUDING B GRADE KITS). IN WEATHER THAT CHANGES CONSTANTLY AND ESPECIALLY IN HEAT SURFACE CRACKS OR WHAT WE CALL SHAKES MAY APPEAR IN THE POSTS AND RAILS. THIS IS OUT OF OUR CONTROL AND SOMETHING WE WILL NOT ACCEPT CRITICISM FOR! What do you get in your pergola kit.
4 Smooth planed 2.4m posts notched. Runners notched and ready to slide into the side rails. Fixing kit including Base plates, screws, drill bits and PZ2 driver bit. How to Install your Pergola. Fix metal base plates to bottom of posts with 4no 3 silver screws.Posts are handed so they are notched at two different levels. The side rail with multiple notches joins onto the side of the post with the deepest notch.
3m apart and fix a side rail onto the deepest notch with the end groove of the rail in line with the higher groove. This is so when you start inserting the runners the end ones sit tight against the post. Once positioned use the small 6mm drill to pilot hole the rail and use 2no 3 screws to fix in place. Repeat the process with the other side. Stand two posts up (side rail to the outside) and fix in place using either the wood bit or concrete bit to drill into your deck or concrete pad.
Fix 1 bolt and a washer in each base plate. This is a two man job or better with 3!DO NOT BOLT DOWN THE TWO POSTS FULLY YET! Now place opposite the other two posts and rail and start inserting the runners and fix in place by drilling a pilot hole then use the 3 silver screw's to hold in place. There are two wood diagonal to go at each corner. 1 from each end and fix in place using 1no gold screw. They also help square up the posts and keep the pergola/lean to more stable. At this point measure corner to corner to get structure squared up. Using a spirit level straighten the posts. If you are happy that all is lined up to your satisfaction you can now go crazy and fit all bolts and washers. Deliveries go out between 1-4 weeks from date of order depending upon how busy we are. All other areas FREE of charge if minimum order as stated in listing is made. Orders placed between any Saturday up to Friday evening are usually dispatched the following week. Our drivers will offload for you to the front of your property only! Deliveries into London will be between 3am and 6am (We are like church mice). Only acts of god, floods, snow and breakdowns will stop us.
The item "2.4m wide x 2.4m deep x 2.4m timber wooden garden gazebo pergola kit" is in sale since Sunday, May 2, 2021. This item is in the category "Garden & Patio\Garden Structures & Shade\Gazebos & Pergolas".
The seller is "wwwtimber-shiplap-claddingcouk" and is located in Driffield. This item can be shipped to United Kingdom.